How to clean front load washing machine. 

Cleaning your front load washing machine regularly is important to keep it in good condition and prevent odors, mildew, and mold from forming. Here is how you can clean your front load washer

Step 1:

Clean the drum. The drum is the part of the washer where you put your clothes. It can get dirty from detergent residue, dirt, and bacteria. To clean the drum, you can use one of these methods:

• Vinegar and baking soda. This is a natural and effective way to remove odors and mildew from the drum. Mix 1/4 cup of baking soda and 1/4 cup of water and pour it into the detergent dispenser. Then, pour 2 cups of white vinegar into the drum. Run a hot cycle without any clothes. The vinegar and baking soda will react and create bubbles that will scrub the drum and kill the germs.
• Bleach. This is a stronger and faster way to disinfect and sanitize the drum. Pour 1 cup of bleach into the detergent dispenser and run a hot cycle without any clothes. Bleach will kill any mold, bacteria, or fungus that may be growing in the drum. However, bleach can also damage the rubber seals and gaskets, so use it sparingly and only when necessary.

Step 2:

Clean the gasket. The gasket is the rubber seal around the door that prevents water from leaking out. It can also trap dirt, lint, hair, and mold, which can cause bad smells and stains. To clean the gasket, you can use one of these methods:

• Hot soapy water. This is a simple and gentle way to wipe away the dirt and grime from the gasket. Use a sponge or a cloth dipped in hot soapy water and scrub the gasket thoroughly. Make sure to pull back the folds and crevices and remove any debris that may be stuck there. Rinse with clean water and dry with a towel.
• Mildew cleaner. This is a more powerful and effective way to remove mildew and mold from the gasket. Spray a mildew cleaner on the gasket and let it sit for a few minutes. Then, use a toothbrush or a scrub brush to scrub the gasket vigorously. Rinse with clean water and dry with a towel.

Step 3:       

Clean the detergent drawer. The detergent drawer is where you put the detergent, fabric softener, or bleach. It can also get clogged with residue, soap scum, and mold, which can affect the performance and efficiency of the washer. To clean the detergent drawer, you can use one of these methods:

• Multi-purpose cleaner. This is a convenient and easy way to clean the detergent drawer. Remove the drawer from the washer and spray it with a multi-purpose cleaner. Use a sponge or a cloth to wipe the drawer and remove any dirt or residue. Rinse with clean water and dry with a towel.
• Vinegar and water. This is a natural and cheap way to clean the detergent drawer. Remove the drawer from the washer and soak it in a bucket of hot water and vinegar for an hour. Then, use a toothbrush or a scrub brush to scrub the drawer and remove any dirt or residue. Rinse with clean water and dry with a towel.

Step 4:

Clean the filter. The filter is located at the bottom corner of the washer and it collects lint, coins, buttons, and other small items that may come out of your clothes. It can also get clogged with dirt and debris, which can cause the washer to drain slowly or not at all. To clean the filter, you can use this method:

• Water and cloth. This is the only way to clean the filter. Turn off the washer and unplug it from the power source. Place a towel or a tray under the filter to catch any water that may leak out. Open the filter door and twist the filter counterclockwise to remove it. Rinse the filter under running water and use a cloth to wipe it clean. Check the filter cavity and remove any debris that may be there. Replace the filter and twist it clockwise to secure it. Close the filter door and plug the washer back in.

Step 5:

Clean the exterior. The exterior of the washer is the part that you see and touch. It can also get dirty from dust, fingerprints, and spills. To clean the exterior, you can use one of these methods:

• Multi-purpose cleaner. This is a convenient and easy way to clean the exterior. Spray the exterior of the washer with a multi-purpose cleaner and use a microfiber cloth to wipe it clean. Pay attention to the knobs, buttons, and display panel and make sure they are free of dirt and grime.
• Vinegar and water. This is a natural and cheap way to clean the exterior. Mix equal parts of vinegar and water in a spray bottle and spray the exterior of the washer. Use a microfiber cloth to wipe it clean. Vinegar will also remove any hard water stains or soap scum that may be on the exterior.

By following these steps, you can keep your front load washing machine clean and fresh. You should clean your washer at least once a month or more often if you notice any odors, mildew, or mold. You can also prevent these problems by doing the following:   

• Leave the door and the detergent drawer open after each wash to let the washer air dry and prevent moisture buildup.
• Use the right amount and type of detergent for your washer and your water hardness. Too much or too wrong detergent can cause residue and suds, which can damage the washer and the clothes.
• Run an empty hot cycle with vinegar or bleach once in a while to sanitize and deodorize the washer.
• Remove the clothes from the washer as soon as the cycle is done to prevent them from getting musty or moldy.

Click Here  to book an appointment to get all your home appliances repaired, serviced or new appliances installed.

_container]